- 🐠【Demension & Specifications】Powerful and ultra quiet water return pump. Input voltage: 100-240V 50/60HZ. Output voltage: DC 24V. Pump Dimension (LxWxH): 6.2 x 3.1 x 5 inch. Cord length from the pump to controller is 6ft, the power cord length is 6.6ft. Wattage/flow/head: 33W/1060GPH/13.1ft head. Please look the chart for each models
- 🐠【 Auto Shut Off When No Water】 Plug the power to turn this water pump on, unplug the power to turn it off. It is protected in case there's no water, the pump will auto shut off when no water is sensed or water gets too low. Comes with 2 kinds of removable water intake screens,1 for normal water level and the other for low water level (higher than 0.8inch)
- 🐠【Adjustable Flow Speed】This aquarium water pump has an external Led display controller, with 71 flow speed settings, you can control the flow rate from 30% to 100% of the top speed flow. 3 buttons on the controller: "Up" "Down" "Pause"
- 🐠【Internal & External Use】 Hygger dcp water pump can be ran externally or be submerged. Please note the controller is not waterproof, must be placed indoors. The pond pump comes with screws, o rings, pipe connection fittings. You can connect 1" or 3/4" pipes to this pond pump
- 🐠【Durable Water Pump】Wear-resistant ceramic shaft and magnetic drive makes this water pump a long service life. No copper element, can be used for fresh water or salt water. Need 10ft extension cord for the controller and pump, please go for ASIN B08CB69DSF
Hygger DCP controllable 24V quiet water pump, comes with a special U-shape water intake shell, which makes this return pump can be used in low water level. A powerful water pump for fish tanks, aquariums, ponds, fountains, waterfalls, sump, hydroponics, irrigation use, for fresh water and salt water.
2 kinds of water intake screens
Hygger water pump is different from others, because it comes with 2 kinds of removable water intake shells. It can be used in the lowest water level of 0.8 inch.Aquarium Water Pump Other Features:
- Ultra quiet, runs at low vibration.
- Auto shut off when no water is sensed.
- High performance, energy saving up to 65% and safe operation.
- Can be used internally or externally, for salt-water or fresh water use.
- Durable for long time use, with anti-resistant ceramic shaft, magnetic drive.
- Easy to disassemble it by hand for cleaning, the impeller is removable.
- With 71 settings external controller, easy to control the flow rate from 30% to 100%.
Attachments for small water pump
The small dimension 800GPH and 1060GPH water pump comes with the following 8 attachments:
The connections are made of ABS, you can use PVC, PE, PP pipes for this water pump.The small water pump is very compact, you can hold it by one hand.
Directions for use
Use as internal submersible water pump
Use as external/inline water pump
Error codes & solutions:
- Er01: abnormal working current, please check line to the pump or the controller for short circuit.
- Er02: controller overheat, please place the controller in a cool place, avoid exposure or high temperature.
- Er03: pump running dry, please check if the water line is too low to fully submerge the water intake.
- Er04: propeller get stuck, please check whether there are stuffs blocked the propeller or wiring errors.
- Er05: abnormal input voltage, please check the power voltage is 100-240V 50/60HZ.
If you find the "Up", "Down", "Pause"button on the controller are failed to operation, you may have locked the controller accidently, in this case, you need to long press the "Pause"button for 3 seconds to unlock the controller.
On the other hand, to lock the controller, please long press the "Pause"button for 3 seconds.