One meter with two uses
Testing the magnetic field and electric field. Automatic alarm above safe value(40V/m or 0.4μT/4mG).
Easy to operation
Operate with one hand and move or make field measurements. Automatically shut down after 5 minutes without operation.
Mainly used to test microwave ovens, TVs, hairdryers, computers, low-frequency household appliances, wires, etc.
- Electric field：
- Range: 1V/m-1999V/m
- Alarm threshold: >40V/m
- Resolution: 1V/m
- Magnetic field:
- Range: 0.01μT-99.99μT / 0.1 mG - 999.99 mG
- Alarm threshold: >0.4μT / 4mG
- Resolution: 0.01μT / 0.1 mG
Power On/Off & Data Hold
Short press this button to turn on the meter.
Press this button fter setup the meter, the reading will be locked, press again can concel it.
Long press this button to turn off the detector.
Average/Peak Value Mode & Buzzer Switch
Short press this button to switch average or peak value mode.
Long press this button to turn the buzzer on or off.
Short press this button to switch the magnetic field unit between uT and mG.
Large & Clear LCD Display
When magnetic field's reading more than 40V/m and electric field's reading more than 0.4μT/4mG, the screen will turn red, and show "Warning" on display.